Miter Saw / October 25, 2018 / Albertina Davide.
Use a long straightedge in all directions to make sure that the miter saw and the miter saw table are flush with each other. Mount the saw securely to the shelf using lag screws. Once the miter saw is mounted you can begin to construct the fence or fences. A simple inexpensive fence can be constructed using 1 x 4 or 1 x 6 clear fir boards. These boards should be hand selected for straightness and jointed on one edge. One board will be the actual fence and the other will keep it straight from behind. The fence sits with its jointed edge on the saw table top while the back-up board lies flat on the table behind the fence with its jointed edge joined to the bottom of the fence.
Make certain to turn the nut in the direction indicated on the saw as most are reverse threaded. While this area of your saw is open you should blow any lingering dust or debris. Dust will accumulate around the center of the blade which can effect the blades alignment and consequently the accuracy of its spin. You should also check the washer and mounting plate for security and for any dust or residual buildup. Simply use any standard scouring pad to remove rust or residue. General Tips: Miter Table Top: Its not only important to keep dust away from your blade its also crucial to keep dust off the miter saw table. Keeping the saw table surface clean keeps you safe and ensures a cleaner more precise cut. Its also good practice to not oil or lube the table top as you dont want any materials sliding or slipping during a cut. Essentially its important to keep the saw table surface clean but also to keep it slip free for the security of your materials and fingers. Miter Fence: A good fence is crucial for cutting accuracy.
There are three basic types available; the power miter saw compound miter saw or sliding compound miter saw. The power miter saw is a basic model that is good for a person who only intends to make simple cuts of 90 degrees or less such as the cuts necessary for trimming studs to frame a house. A compound miter saw is more versatile than the simpler power model since it adjusts for both miter and bevel cuts. Sliding compound models are more advanced and most versatile model of all miter saws. Because the motor and blade assembly is mounted on a movable arm this saw is perfect for accommodating longer pieces of wood while still performing beautiful cuts on smaller pieces as well. If the project you are doing around the house is quite extensive you might want to consider also purchasing a miter saw stand. The stand is one of the most important elements of a miter saw setup. If the saw does not have a good stable place to sit operating the machine will be frustrating and tedious. A stand will also provide a place for very long pieces of wood to rest while being cut. The purpose you intend to use the saw for will determine what type of stand you should purchase.
This also allows you to push the tool directly against a wall for use with literally zero clearance behind it and because the saw is insanely compact (weighing only 65 lbs) its simple to use in cramped low-space work-spaces and convenient to store and transport. In place of the sliding rail interface of former saws 12 sealed ball bearings make up the GCM12SDs new enclosed system one that maintains its integrity for essentially all-time providing the smoothest blade movement and vastly better control. Because this system is also enclosed its bearings and rollers wont accumulate jobsite debris thus ensuring it remains with a glide like nobodys business for its entire life-cycle. The thing also features a glide damper allowing you to adjust the saws resistance changing the "glide" mechanism as you see fit. Built with a totally transparent lower guard the saw additionally ensures youll have completely unimpaired visibility through each cut.