Miter Saw / November 10, 2018 / OdeletteGervais.
The longer you can build it the better off it will be for you but any length of saw table is better than no table at all. My miter saw table measures 8 Feet to the left of the saw blade and another 8 feet to the right of the saw blade. This way I can support the full length of a sheet of plywood on either side. The saw table is constructed over 2 x 4 framing and contains multiple storage drawers below the table which I use to store small tools and supplies. If you prefer the space underneath the saw table can be left open for shelf space or lumber storage. I suggest that the top surface be 3/4" Melamine or Formica over 3/4" particle board.
Slide the guard up slightly. This will reveal the screw that holds the guard to the miter saw. Loosen that screw so that you can slide the blade guard further backward. Slide it back as far as it will go positioning it about 170-degrees behind its usual position. This gives you access to the saws locking pin and blade bolt. Depress the saws locking pin (in the very center of the blade) and spin the saw blade until it locks. If your saw does not have a locking pin wedge your scrap wood (ideally a piece of 2x4) in front of the blade to prevent it from moving. Next using an Allen wrench (or an open-ended wrench) remove the blade bolt. Though many saws have a reverse threaded blade bolt the thread pattern is not universal to all miter saws. Accordingly you should look for an indicator on the tool of which way to loosen the bolt or review your tools manual before going to town on it. Remove the flange and finally remove the blade.
The most portable power miter saw has a blade of eight (8) to twelve (12) inches. The power miter saws cut your woodwork in a certain motion and is against a fence where it produces an angle that is so precise. Since the birth of the first chop saw miter saws have steadily become more advanced more popular and incredibly more useful. In fact where precision crosscuts and accurate miters are concerned there is scarcely a better tool than a miter saw. Allowing users to work faster and with far greater accuracy to perform compound miter cuts bevel cuts and to work with larger pieces of material the multipurpose miter saw is a tool that little else can contest.
The GCM12SD in its perfect completeness also offers best in class dust collection at 90% dust efficiency when cutting 2x material with a vacuum attached to its integrated standard dual-purpose dust port. The new axial-glide design also expands the miter saws cutting capacity to 14" horizontally 6.5" vertically against the fence (base) and 6.5" when cutting crown against the fence (45 degree spring) for the most optimal usability. Additionally the saws etched stainless steel easy-to-read miter scale aligns with 10 adjustable miter detents allowing you to cut unique angles with accurate detents over the saws 52° left to 60° right miter range. Furthermore two 33.9° bevel stops are conveniently integrated and the saws high-visibility scale enables front bevel angle adjustments from 0 - 47° left or right. Situated conveniently at the front of the saw its push-button miter detent override additionally offers fractional adjustments for the most precise cut-lines.