Miter Saw / November 21, 2018 / OdeletteGervais.
There are three basic types available; the power miter saw compound miter saw or sliding compound miter saw. The power miter saw is a basic model that is good for a person who only intends to make simple cuts of 90 degrees or less such as the cuts necessary for trimming studs to frame a house. A compound miter saw is more versatile than the simpler power model since it adjusts for both miter and bevel cuts. Sliding compound models are more advanced and most versatile model of all miter saws. Because the motor and blade assembly is mounted on a movable arm this saw is perfect for accommodating longer pieces of wood while still performing beautiful cuts on smaller pieces as well. If the project you are doing around the house is quite extensive you might want to consider also purchasing a miter saw stand. The stand is one of the most important elements of a miter saw setup. If the saw does not have a good stable place to sit operating the machine will be frustrating and tedious. A stand will also provide a place for very long pieces of wood to rest while being cut. The purpose you intend to use the saw for will determine what type of stand you should purchase.
The longer you can build it the better off it will be for you but any length of saw table is better than no table at all. My miter saw table measures 8 Feet to the left of the saw blade and another 8 feet to the right of the saw blade. This way I can support the full length of a sheet of plywood on either side. The saw table is constructed over 2 x 4 framing and contains multiple storage drawers below the table which I use to store small tools and supplies. If you prefer the space underneath the saw table can be left open for shelf space or lumber storage. I suggest that the top surface be 3/4" Melamine or Formica over 3/4" particle board.
These precise miter cuts are made with the downward motion of a circular saw blade that spins with the power of the tools motor. There are several types of miter saw available the standard miter a compound miter and a sliding or compound sliding miter saw. The standard miter has a blade pivot from right to left to cut miters; this saw is however becoming less popular as compound miters have more applications and are only slightly more expensive. Compound miters have the ability to bevel cut or tip the blade to either the left or right side (00 - 500). Some can bevel in both directions allowing operators to miter and bevel within the same cut (-500 through 500). A sliding miter saw is just like a compound miter but with extension rods that allow the saw blade and motor to move forward and back.
And lastly is the table extension where it balances and stops your wood. Miter saw blades also have its different sizes and classifications which are classified into three. 1. The first one is the steel blades which are normally used for plywood and is the least expensive of the three. 2. Second is the high-speed blades which are used both in soft and hard concrete. 3. Third is the carbide-tipped which is the long-lasting and the most expensive of the three blades. Those are the miter saws common features and the kinds of blades that would give you a hint on what miter saw you need. The manual miter saw are only used oftentimes by woodworkers in making frames and produces simpler cuts than that of the compound miter saws.