Miter Saw / October 27, 2018 / Evelin Nordin.
A fence can be attached to the back side of the 4 x 4. Use a 1 x 6 or 1 x 8 clear fir board for this purpose. As in the permanent table above the front of the fence must align perfectly with the miter saws metal fence. If a wider support surface is needed a second 4 x 4 can be mounted directly in front of the one with the fence attached to it. A Kreg Trak system with a flip-up stop can also be used on this portable miter saw table. Just make sure the wooden fence is ripped to the proper height to allow the flip-up stop to clear the table by 1/16". (Fence is 2 1/4" + above the top of the 4 x 4.) As for the support table I have used a plastic fold-up table from Costco. They come in various sizes to suit your particular need. Or you can make your own table out of 2 x 4s and 3/4" plywood. Design it so that the legs can fold up for transportation and storage.
This is incredible handy and especially helpful when cutting molding. Miter saws are available with one one bevel (single bevel blade tilts to the left) and two bevels (dual or double bevel blade tilts to the left and right). In order to make a bevel cut in the opposite direction single bevel saws require that stock be flipped end for end (which can be a pain). Double bevel saws on the other end offer simple bevels to both the left and right. While double bevel miter saws are more expensive the price difference (about $50 - $100) is almost negligible if you use the feature.
This also allows you to push the tool directly against a wall for use with literally zero clearance behind it and because the saw is insanely compact (weighing only 65 lbs) its simple to use in cramped low-space work-spaces and convenient to store and transport. In place of the sliding rail interface of former saws 12 sealed ball bearings make up the GCM12SDs new enclosed system one that maintains its integrity for essentially all-time providing the smoothest blade movement and vastly better control. Because this system is also enclosed its bearings and rollers wont accumulate jobsite debris thus ensuring it remains with a glide like nobodys business for its entire life-cycle. The thing also features a glide damper allowing you to adjust the saws resistance changing the "glide" mechanism as you see fit. Built with a totally transparent lower guard the saw additionally ensures youll have completely unimpaired visibility through each cut.
Accordingly miter saw blade changes are one of the most common tool maintenance applications. Fortunately for tool users of all skill levels changing the blade on a miter saw is easier than you might think. In fact whether your saw has a blade lock feature or not changing your miter saw blade requires only a few minutes a screw driver an Allen wrench and in some cases a hunk of scrap wood. As with all repair and maintenance procedures the first step in replacing your miter saw blade is embracing a few safety precautions. Disengage the saw and unplug it; never work on a power tool that has the potential to turn on. You might also throw on your safety glasses because they make everyone look smarter and absolutely stay focused. Handling a blade is always dangerous and particularly so if youre rushed or distracted. So keep your eyes on the prize. The next step is bypassing the blade guard.