Miter Saw / November 30, 2018 / Tina Abrahamsson
And time is of the essence in woodworking and carpentry. There are times when you just need to finish a piece in a hurry. To make your woodworking or carpentry job faster you may need to get a power miter saw. Essential Uses of a Power Miter Saw: Also known as a chop saw or a drop saw the miter saw is every craftsman and carpenters best friend. It does not only help in making miter joints faster but it can also be used in other applications. Framing is one of the fastest building techniques. To facilitate framing construction carpenters need the right tools. One of the essential tools that carpenters will have is the power miter saw. In framing construction lots of frames are needed to be made in a short span of time. A miter saw does not only help in cutting frames at a fast rate but it also ensures that the frames are accurately cut. Molding is another essential construction material.
Use a long straightedge in all directions to make sure that the miter saw and the miter saw table are flush with each other. Mount the saw securely to the shelf using lag screws. Once the miter saw is mounted you can begin to construct the fence or fences. A simple inexpensive fence can be constructed using 1 x 4 or 1 x 6 clear fir boards. These boards should be hand selected for straightness and jointed on one edge. One board will be the actual fence and the other will keep it straight from behind. The fence sits with its jointed edge on the saw table top while the back-up board lies flat on the table behind the fence with its jointed edge joined to the bottom of the fence.
Make certain to turn the nut in the direction indicated on the saw as most are reverse threaded. While this area of your saw is open you should blow any lingering dust or debris. Dust will accumulate around the center of the blade which can effect the blades alignment and consequently the accuracy of its spin. You should also check the washer and mounting plate for security and for any dust or residual buildup. Simply use any standard scouring pad to remove rust or residue. General Tips: Miter Table Top: Its not only important to keep dust away from your blade its also crucial to keep dust off the miter saw table. Keeping the saw table surface clean keeps you safe and ensures a cleaner more precise cut. Its also good practice to not oil or lube the table top as you dont want any materials sliding or slipping during a cut. Essentially its important to keep the saw table surface clean but also to keep it slip free for the security of your materials and fingers. Miter Fence: A good fence is crucial for cutting accuracy.