Miter Saw / October 29, 2018 / Fiore Calabrese.
Most of these miter saws are portable with blade sizes ranging from eight to twelve inches. This saw works by pulling a circular saw blade down onto a work piece in a short controlled motion the work piece being held against a fence. This fence provides an accurate cutting angle between the blade and the longest work piece edge. In a standard position this angle is fixed at 90 degrees. The primary feature that distinguishes this saw from others is its miter index that allows the angle of the blade to be altered relative to the fence. Whereas most miter saws provide a facility to make a one degree incremental change to the miter index many also provide stops that allow the miter index to be properly set to common angles of repose like 15 degrees 30 degrees or 45 degrees. Some salient features of the sliding miter saws are as under: - A compound feature allows the angle of the cutting blade to be altered relative to the cutting plane. This also allows the saw to be used for bevel cutting.
If you do find that you have to cut a piece that is larger than six inches and all you have is a 10 inch miter saw you do have a couple of options. The first is that you can simply cut as far as you can and then flip the piece over the finish the cut. The downside is that not all angles can be cut this way. The other issue is that lining up the cuts can be a problem although a laser on your saw will make things a lot easier. Another option that you may want to consider if you have a piece that is a little bit too big for your 10 inch miter saw is to use a piece of wood to raise the cutting deck. This will allow you to get closer to the middle of the blade which will give you more distance. Not all saws have the motor mounted high enough off the deck to make this possible so you will have to check if this is an option with your saw. If you do use this method make sure that you attach the wood firmly to the deck so that it does not slide around while you are cutting. The above methods for making cuts larger than six inches with a 10 inch miter saw are stop gaps that you can use if it is something that only happens occasionally.
And lastly is the table extension where it balances and stops your wood. Miter saw blades also have its different sizes and classifications which are classified into three. 1. The first one is the steel blades which are normally used for plywood and is the least expensive of the three. 2. Second is the high-speed blades which are used both in soft and hard concrete. 3. Third is the carbide-tipped which is the long-lasting and the most expensive of the three blades. Those are the miter saws common features and the kinds of blades that would give you a hint on what miter saw you need. The manual miter saw are only used oftentimes by woodworkers in making frames and produces simpler cuts than that of the compound miter saws.
The greatest benefit of having a miter saw is that you can finish your work quickly and spend more quality time with your family. A miter saw (also called as mitre saw and less commonly miter box) is a mechanical tool used for making accurate crosscuts and miters in a workpiece. There are two types of miter saws commonly found. These are manual miter saw and a motorized miter saw. The first miter saw ever made in the world was a manual miter saw. It is a saw having replaceable blades suspended on rollers in a metal guide which allows making of accurate crosscuts and miter cuts. These are more commonly used in picture framing but have now been replaced by its power operated counterpart. The manual miter saw is also the sliding miter saw. The motorized miter saw which is operated on power is also called as chop saw or drop saw. It is a power operated tool that is used to make quick accurate crosscuts in a work piece. This power tool is commonly used in framing operations and cutting of molding.