Miter Saw / November 30, 2018 / OdeletteGervais.
Think about a picture frame: the end of each piece of stock is cut at a 45-degree angle but the cut is also made at a bevel from front to back so the matching face is hidden and the joint is neat. Determining What You Need Its important to consider the types of jobs youll be doing when choosing a miter saw. A larger blade can of course handle larger stock. I knew that for the most part I would be working on projects like crown molding picture frames and baseboard trim so a 10-inch blade would be large enough for my purposes. I researched a number of miter saws and ended up choosing the Makita LS1040. This model is very light for a mid-sized miter saw weighing only about 24 pounds. One reason the saw is so light is that the base and side rails are machined from aluminum which gives it light weight but also means that the saw will be durable. Because were remodeling the house we live in I knew that my wife would expect the tools to be taken back to the workshop behind our house after each work session. Thus the lightweight Makita really filled the bill.
The saw must be mounted in this gap so that the top of the miter saw table is flush with the top of the saw table. The miter handle must be free to move its full travel in both directions left to right. Anticipate the need for this gap as you are framing the underside of your miter saw table because you will need to construct a shelf underneath to support the weight of the miter saw. You might want to make this shelf adjustable in micro increments so that you can get the top of the saw platform exactly flush to the top of the saw table. You can do this with lag screws with washers in sliding slots through the shelf sub-structure and into the table framing. Slightly loosen the lags and tap the table up or down with a rubber hammer before tightening the lags fully.
To get technical for a very brief moment (and using the average 10-inch compound miter saw and the average 12-inch sliding compound miter saw (opposite ends of the spectrum to bookend your possible cutting capacities) 10 and 12-inch miter saws usually offer the following cutting capacities: Max Crosscut at 90-Degrees: 2-1/2-inches by 6-inches - through - 4-1/2-inches by 12-1/2-inches. Max Crosscut at 45-Degrees: 2-inches by 8-inches - through - 4-1/2-inches by 8-1/2-inches. Blade at 45-degrees: 2-inches by 6-inches cut - through - 3-inches by 12-inches. Max Standing Molding: 4-inches - through - 6-inches. Bevel: Bevel controls allow users to adjust the angle of the blade to make angled cuts along the thickness of a board.
The greatest benefit of having a miter saw is that you can finish your work quickly and spend more quality time with your family. A miter saw (also called as mitre saw and less commonly miter box) is a mechanical tool used for making accurate crosscuts and miters in a workpiece. There are two types of miter saws commonly found. These are manual miter saw and a motorized miter saw. The first miter saw ever made in the world was a manual miter saw. It is a saw having replaceable blades suspended on rollers in a metal guide which allows making of accurate crosscuts and miter cuts. These are more commonly used in picture framing but have now been replaced by its power operated counterpart. The manual miter saw is also the sliding miter saw. The motorized miter saw which is operated on power is also called as chop saw or drop saw. It is a power operated tool that is used to make quick accurate crosscuts in a work piece. This power tool is commonly used in framing operations and cutting of molding.