Miter Saw / October 27, 2018 / Evelin Nordin.
The saws all metal bevel lock lever and range selector are also integrated perfectly into the front of the saw eliminating the need for users to crawl around the thing to make adjustments. The tools soft-grip trigger handle is also ergonomic and ambidextrous for the most comfortable use for every craftsman. The GCM12SD additionally boasts Boschs high-precision Squarelock fence famous for requiring no adjustments its one touch lock/unlock slide and its always stable fence support. Precision machining also ensures the two-piece fence is always aligned to the table top at exactly 90° to produce cuts accurate enough to predict the weather (so to speak). Each side of the miter saw also sports integrated expanding base extensions or material supports that pull-out and lock into position to provide 40 inches left-to-right material support - thats a full 60% more than the leading competitor.
And lastly is the table extension where it balances and stops your wood. Miter saw blades also have its different sizes and classifications which are classified into three. 1. The first one is the steel blades which are normally used for plywood and is the least expensive of the three. 2. Second is the high-speed blades which are used both in soft and hard concrete. 3. Third is the carbide-tipped which is the long-lasting and the most expensive of the three blades. Those are the miter saws common features and the kinds of blades that would give you a hint on what miter saw you need. The manual miter saw are only used oftentimes by woodworkers in making frames and produces simpler cuts than that of the compound miter saws.
A fence can be attached to the back side of the 4 x 4. Use a 1 x 6 or 1 x 8 clear fir board for this purpose. As in the permanent table above the front of the fence must align perfectly with the miter saws metal fence. If a wider support surface is needed a second 4 x 4 can be mounted directly in front of the one with the fence attached to it. A Kreg Trak system with a flip-up stop can also be used on this portable miter saw table. Just make sure the wooden fence is ripped to the proper height to allow the flip-up stop to clear the table by 1/16". (Fence is 2 1/4" + above the top of the 4 x 4.) As for the support table I have used a plastic fold-up table from Costco. They come in various sizes to suit your particular need. Or you can make your own table out of 2 x 4s and 3/4" plywood. Design it so that the legs can fold up for transportation and storage.
Before joining the two boards together slotted holes should be cut into the back-up board for the purpose of mounting and adjusting the fence position on the table top with reference to the fence on the miter saw. These slots should be slightly wider than the shaft diameter of the lag screws you intend to use to mount the fence to the table. Cut a few equally spaced slots in the back-up board perpendicular (at right angle) to the fence. A 2 x 4 joist should be located under the table top centered underneath the slots in the back-up board. This will give the lag screws something solid to bite into.