Miter Saw / October 31, 2018 / Tina Abrahamsson.
I quickly realized that the tool of choice would be a compound miter saw especially when tackling the crown moldings. I had suffered through a bookcase project a year earlier using a manual miter box and back saw to produce the crown molding trim on several built-in bookcases. There was no way I wanted to repeat that experience! My wife eager to see the remodeling project underway readily agreed to a new saw purchase. A Saw By Any Other Name Miter (or mitre) saws are designed to make angled cuts in wood stock by pulling a circular blade down in a plunging motion. This action gives the saws their nicknames of "drop saws" or "chop saws." A further refinement the compound miter saw can cut both an angle and a bevel simultaneously removing the need for a "work-and-turn" motion when making an angled cut that will smoothly join to another piece of trim or molding. The double action cut is possible because the motor is attached to a pivoting post which allows the blade to swing both side to side and at an angle to the workpiece.
A saw with a compound feature is called as compound miter saw or CMS. - A slide allows the cutting blade to be moved several inches along the cutting plane which in turn allows the cutting blade to make cuts which are longer than the diameter of the blade. A slide which combines the features of slide and compound miter saw is called as sliding compound miter saw or SCMS. - A laser guide gives the exact indication of where the cut will be made in the work piece in the arrangement. - A blade guard is a cover for the sharp teeth of the cutting blade. Most modern saws have a self retracting blade guard which automatically retract when the blade is lowered onto a work piece and re-cover the blade when it is raised. One question that a lot of people have when they are buying a miter saw is just how wide of a cut can be made with this particular saw. In this article we will look at how big a cut a 10 inch miter saw can make since they are by far the most common size. We will also discuss what you can do if you need to make a bigger cut. A standard 10 inch miter saw can handle cuts of up to six inches in most cases.
Blade changes are generally pretty simple so dont avoid blade switching out of inconvenience. Using an improper blade can cost you much more in the long run than a few short minutes to pop on a new blade: when cutting to achieve a cleaner more precise cut use a blade with more teeth for a quicker more rough cut use a blade with fewer teeth when crosscutting be sure to use a crosscut blade and so forth. Blade Changes: To change your blade you first need to remove the guard and pivot the blade mount cover or access plate away from the blade and remove the center nut.
Perfect lines and angles are made more easily with the Kapexs fraction of a degree accuracy - once you set a miter angle rest assured it will be exact. The saw is as strong as a brick house but performs with ethereal precision to bring you the most professional results with each and every cut. However as the Kapex is an unconscionably brilliant power tool it also tends to be the most. It is important to remember though that in the business of power tools you always get what you pay for. However if price is a bigger factor or if you are a strictly light-duty user there are many fine miter saws available to meet your big or small industrial needs while also not burning a hole through your wallet. For example: Makitas LS1040 compound miter saw with its light-weight portability and powerful motor sits brilliantly in any home shop or garage.