Miter Saw / November 13, 2018 / OdeletteGervais.
Lube the blade pivot joint around once per year depending on frequency of use. Wipe saw blades clean after every use. Miter saws are a superior power tool to have on hand and their accuracy durability and portability render them nearly indispensable for many woodworkers. For framing molding and other carpentry applications miter saws are by most accounts the king of the wood-shop. Its hard to find the right amount and caliber of words to adequately describe Boschs new dual-bevel axial-glide miter saw. Because the thing is so far beyond awesome so far beyond any prior expectation of miter saw construction the saw stands to not only entirely innovate the way woodworkers work but the way power tools will be hereafter designed and manufactured. Truly the saw deserves a hats-off moment of silence. In fact it probably deserves a national holiday an Avenue with its name or at very least a few well-crafted paragraphs to lengthily accolade its ingenuity. To begin the Bosch GCM12SD dual-slide axial-glide miter saws patented axial-glide system is nothing short of revolutionary.
And lastly is the table extension where it balances and stops your wood. Miter saw blades also have its different sizes and classifications which are classified into three. 1. The first one is the steel blades which are normally used for plywood and is the least expensive of the three. 2. Second is the high-speed blades which are used both in soft and hard concrete. 3. Third is the carbide-tipped which is the long-lasting and the most expensive of the three blades. Those are the miter saws common features and the kinds of blades that would give you a hint on what miter saw you need. The manual miter saw are only used oftentimes by woodworkers in making frames and produces simpler cuts than that of the compound miter saws.
Slide the guard up slightly. This will reveal the screw that holds the guard to the miter saw. Loosen that screw so that you can slide the blade guard further backward. Slide it back as far as it will go positioning it about 170-degrees behind its usual position. This gives you access to the saws locking pin and blade bolt. Depress the saws locking pin (in the very center of the blade) and spin the saw blade until it locks. If your saw does not have a locking pin wedge your scrap wood (ideally a piece of 2x4) in front of the blade to prevent it from moving. Next using an Allen wrench (or an open-ended wrench) remove the blade bolt. Though many saws have a reverse threaded blade bolt the thread pattern is not universal to all miter saws. Accordingly you should look for an indicator on the tool of which way to loosen the bolt or review your tools manual before going to town on it. Remove the flange and finally remove the blade.
There are three basic types available; the power miter saw compound miter saw or sliding compound miter saw. The power miter saw is a basic model that is good for a person who only intends to make simple cuts of 90 degrees or less such as the cuts necessary for trimming studs to frame a house. A compound miter saw is more versatile than the simpler power model since it adjusts for both miter and bevel cuts. Sliding compound models are more advanced and most versatile model of all miter saws. Because the motor and blade assembly is mounted on a movable arm this saw is perfect for accommodating longer pieces of wood while still performing beautiful cuts on smaller pieces as well. If the project you are doing around the house is quite extensive you might want to consider also purchasing a miter saw stand. The stand is one of the most important elements of a miter saw setup. If the saw does not have a good stable place to sit operating the machine will be frustrating and tedious. A stand will also provide a place for very long pieces of wood to rest while being cut. The purpose you intend to use the saw for will determine what type of stand you should purchase.