Miter Saw / November 8, 2018 / Albertina Davide
This motion increases the blade cut capacity enabling the cut length to be longer than the blade diameter. Sliding compound miter saws also have a depth cut setting to cut dadoes into materials at a variety of depths. Sliding miter saws because of bigger capacities and more applications tend to be more expensive than the standard and compound miter saws. Blades: As one would think the price of the saw and of the blades as well tends to rise with the size of the saw and blade. Blade sizes range from eight ten and twelve inches; ten and twelve inches being the most popular sizes. Not only does the blade price increase with size but also with tooth count. It is important that you use the proper blade for each application.
A saw with a compound feature is called as compound miter saw or CMS. - A slide allows the cutting blade to be moved several inches along the cutting plane which in turn allows the cutting blade to make cuts which are longer than the diameter of the blade. A slide which combines the features of slide and compound miter saw is called as sliding compound miter saw or SCMS. - A laser guide gives the exact indication of where the cut will be made in the work piece in the arrangement. - A blade guard is a cover for the sharp teeth of the cutting blade. Most modern saws have a self retracting blade guard which automatically retract when the blade is lowered onto a work piece and re-cover the blade when it is raised. One question that a lot of people have when they are buying a miter saw is just how wide of a cut can be made with this particular saw. In this article we will look at how big a cut a 10 inch miter saw can make since they are by far the most common size. We will also discuss what you can do if you need to make a bigger cut. A standard 10 inch miter saw can handle cuts of up to six inches in most cases.
If you were making repetitive cuts and you needed to stop to use the saw momentarily for a different kind of cut you could resume your repetitive cutting immediately without losing any accuracy. PORTABLE MITER SAW TABLE FOR JOBSITE USE A jobsite miter saw table is usually made with the saw mounted to the extreme right end of the table. I have found that most miter saw manufacturers make their metal table surfaces so that they are 3 1/2" above the table on which the saw is resting. A very straight milled 4 x 4 (3 1/2" x 3 1/2") can be mounted onto the table top almost abutting the left side of the metal table of the saw. The 4 x 4 should extend out the full length of the supporting table to the left and be mounted to the supporting table.