Miter Saw / November 30, 2018 / Tina Abrahamsson
A saw with a compound feature is called as compound miter saw or CMS. - A slide allows the cutting blade to be moved several inches along the cutting plane which in turn allows the cutting blade to make cuts which are longer than the diameter of the blade. A slide which combines the features of slide and compound miter saw is called as sliding compound miter saw or SCMS. - A laser guide gives the exact indication of where the cut will be made in the work piece in the arrangement. - A blade guard is a cover for the sharp teeth of the cutting blade. Most modern saws have a self retracting blade guard which automatically retract when the blade is lowered onto a work piece and re-cover the blade when it is raised. One question that a lot of people have when they are buying a miter saw is just how wide of a cut can be made with this particular saw. In this article we will look at how big a cut a 10 inch miter saw can make since they are by far the most common size. We will also discuss what you can do if you need to make a bigger cut. A standard 10 inch miter saw can handle cuts of up to six inches in most cases.
Use a long straightedge in all directions to make sure that the miter saw and the miter saw table are flush with each other. Mount the saw securely to the shelf using lag screws. Once the miter saw is mounted you can begin to construct the fence or fences. A simple inexpensive fence can be constructed using 1 x 4 or 1 x 6 clear fir boards. These boards should be hand selected for straightness and jointed on one edge. One board will be the actual fence and the other will keep it straight from behind. The fence sits with its jointed edge on the saw table top while the back-up board lies flat on the table behind the fence with its jointed edge joined to the bottom of the fence.
Producing a virtually unparalleled smoothness of cut the tool is unbelievably precise and offers optimal operator control throughout every conceivable working condition. The new axial system completely replaces the miter saws former and comparatively underdeveloped rail system with two multi-joint articulating (or hinged) arms which appear more akin to a space-robot than a power tool. These cast-iron arms also ensure the saw remains properly aligned and calibrated despite time and unfavorable environments. Additionally the saws axial design is not only responsible for its unmatched durability and crazy-smooth precision but it also folds to sit flush with the back of the saw saving up to 12" of workspace compared with a standard sliding compound miter saw.