Miter Saw / November 30, 2018 / OdeletteGervais.
Most of these miter saws are portable with blade sizes ranging from eight to twelve inches. This saw works by pulling a circular saw blade down onto a work piece in a short controlled motion the work piece being held against a fence. This fence provides an accurate cutting angle between the blade and the longest work piece edge. In a standard position this angle is fixed at 90 degrees. The primary feature that distinguishes this saw from others is its miter index that allows the angle of the blade to be altered relative to the fence. Whereas most miter saws provide a facility to make a one degree incremental change to the miter index many also provide stops that allow the miter index to be properly set to common angles of repose like 15 degrees 30 degrees or 45 degrees. Some salient features of the sliding miter saws are as under: - A compound feature allows the angle of the cutting blade to be altered relative to the cutting plane. This also allows the saw to be used for bevel cutting.
This motion increases the blade cut capacity enabling the cut length to be longer than the blade diameter. Sliding compound miter saws also have a depth cut setting to cut dadoes into materials at a variety of depths. Sliding miter saws because of bigger capacities and more applications tend to be more expensive than the standard and compound miter saws. Blades: As one would think the price of the saw and of the blades as well tends to rise with the size of the saw and blade. Blade sizes range from eight ten and twelve inches; ten and twelve inches being the most popular sizes. Not only does the blade price increase with size but also with tooth count. It is important that you use the proper blade for each application.
Producing a virtually unparalleled smoothness of cut the tool is unbelievably precise and offers optimal operator control throughout every conceivable working condition. The new axial system completely replaces the miter saws former and comparatively underdeveloped rail system with two multi-joint articulating (or hinged) arms which appear more akin to a space-robot than a power tool. These cast-iron arms also ensure the saw remains properly aligned and calibrated despite time and unfavorable environments. Additionally the saws axial design is not only responsible for its unmatched durability and crazy-smooth precision but it also folds to sit flush with the back of the saw saving up to 12" of workspace compared with a standard sliding compound miter saw.
These precise miter cuts are made with the downward motion of a circular saw blade that spins with the power of the tools motor. There are several types of miter saw available the standard miter a compound miter and a sliding or compound sliding miter saw. The standard miter has a blade pivot from right to left to cut miters; this saw is however becoming less popular as compound miters have more applications and are only slightly more expensive. Compound miters have the ability to bevel cut or tip the blade to either the left or right side (00 - 500). Some can bevel in both directions allowing operators to miter and bevel within the same cut (-500 through 500). A sliding miter saw is just like a compound miter but with extension rods that allow the saw blade and motor to move forward and back.