Miter Saw / October 29, 2018 / Pernilla Lund.
Blade changes are generally pretty simple so dont avoid blade switching out of inconvenience. Using an improper blade can cost you much more in the long run than a few short minutes to pop on a new blade: when cutting to achieve a cleaner more precise cut use a blade with more teeth for a quicker more rough cut use a blade with fewer teeth when crosscutting be sure to use a crosscut blade and so forth. Blade Changes: To change your blade you first need to remove the guard and pivot the blade mount cover or access plate away from the blade and remove the center nut.
Some sort of saw stop comes in handy and greatly speeds production time for this sort of application. A saw stop must mount to something to hold it in place usually a fence. You can make your own fence out of a very straight piece of wood or metal or you can do as I did and purchase a commercially available moveable stop that slides along an aluminum track that includes a stick-on measuring tape. PERMANENT SAW TABLE FOR SHOP USE Since I buy lumber in lengths up to 14 feet long I decided to build a very long miter saw table in my woodworking shop. You may not have the physical space for this in your shop so you may have to reduce my measurements accordingly.
This motion increases the blade cut capacity enabling the cut length to be longer than the blade diameter. Sliding compound miter saws also have a depth cut setting to cut dadoes into materials at a variety of depths. Sliding miter saws because of bigger capacities and more applications tend to be more expensive than the standard and compound miter saws. Blades: As one would think the price of the saw and of the blades as well tends to rise with the size of the saw and blade. Blade sizes range from eight ten and twelve inches; ten and twelve inches being the most popular sizes. Not only does the blade price increase with size but also with tooth count. It is important that you use the proper blade for each application.
Motor Placement: Some saws are built with the motor fixed above of the blade. This makes for easier bevel cuts (especially in thick stock) and typically offers a better line of site while working. Although there is more to every miter saw than the few features listed above these points should help you find the right path to the right saw. Between big cutting capacities bevel adjustments and sliding-tubes there is a miter saw out there that will perfectly compliment your needs. This fact of course brings us right back to our first consideration - that at the end of the day the most important part of any miter saw is its operator.