Miter Saw / October 26, 2018 / Daniela Nilsson.
A slightly more expensive and far better alternative is to use a metal track or tracks with a flip-up stop and measuring tape built in. Such a device is manufactured by Kreg Tools and is available in 4-foot track lengths that can be butted together to make longer lengths. My miter saw table requires four 4-foot tracks two for each side of the saw. The track is mounted to the top of the wooden fence you just made. You will have to adjust the height of the wooden fence (2 1/4"+ above the table top) so that the bottom of the flip-up stop clears the table by about 1/16" in the down position. The nice thing about the flip-up stop is that it can be flipped up out of the way without losing its measurement setting along the measuring tape.
Molding is used to cover transitions between surfaces. Aside from that molding is also used to decorate surfaces. In the old days carpenters struggle in cutting many pieces of moldings. Sweating from cutting moldings can be avoided with the help of a power miter saw. Portability: Aside from helping woodworkers and carpenters work faster and make accurate cuts a power miter saw has other advantages. For one thing a miter saw is designed to be portable. Portability is an excellent feature if you are doing carpentry or woodworking jobs in various places. The Benefit of Working Fast: Woodworking and carpentry are enjoyable occupations and hobbies. In the old days wives complain that their husbands were not allotting much time talking with them and kids grumble that their dads were not attending their Sunday baseball or football games. Daddies are simply spending too much time in the workshop. Of course that is before the advent of power tools like miter saws. Well your family is much important than your work or hobby. As much as possible you should spend time talking and having fun with your family. And that is what you will get if you have a miter saw.
Blade changes are generally pretty simple so dont avoid blade switching out of inconvenience. Using an improper blade can cost you much more in the long run than a few short minutes to pop on a new blade: when cutting to achieve a cleaner more precise cut use a blade with more teeth for a quicker more rough cut use a blade with fewer teeth when crosscutting be sure to use a crosscut blade and so forth. Blade Changes: To change your blade you first need to remove the guard and pivot the blade mount cover or access plate away from the blade and remove the center nut.
The standard miter has a blade pivot from right to left to cut miters; this standard saw is however becoming less popular as compound miters have more applications and are only slightly more expensive. Compound miters have the ability to bevel cut or tip the blade to either the left or right side (0° - 50°). Some can bevel in both directions allowing operators to miter and bevel within the same cut (-50° through 50°). Lastly a sliding miter saw is just like a compound miter but with extension rods that allow the saw blade and motor to move forward and back. This motion increases the blade cut capacity enabling the cut length to be longer than the blade diameter.